AnsysZEMAX OPTICSTUDIO米2024 ANSYS,Inc.or its affiliated companiesUnauthorized use,distribution,or duplication is prohibitedAnsys Zemax OpticStudio 2024 R1Ansys,Inc.Release 2024 R1SouthpointeJanuary 20242600 ANSYS DriveCanonsburg,PA 15317ansysinfo@ansys.comAnsys,Inc.and ANSYS Europe,Ltd.(T724-746-3304are UL registered ISO 9001:2015(日724-514-9494companiesThe File Tab1:The File TabThe File TabThis tab provides access to all of OpticStudio's File Management capabilities for Sequential Ul Mode.This tab provides access to all of OpticStudio's File Management capabilities for Non-Sequential Ul Mode.NewratorThe File tab contains all the file input/output functions,split into these groups:The Lens File group contains all the normal Windows file management tasks like file opening,saving etc.OpticStudiofiles are stored in.ZMX or.ZOS format files,along with associated .CFG files that contain configuration settings,and.SESor .ZDA files that contain settings data for all windows that were open at the time the file was saved.The.ZDA file containssaved analysis data in addition to the settings information.The.SES file extension was used in older versions of Zemaxand OpticStudio,but is compatible with the current version.The Archive group lets you create and open OpticStudio Archive files.These are stored in .ZAR format,and contain allthe files needed to open the file on another computer with OpticStudio installed on it.All OpticStudio data,glass catalogs,coatings,CAD files,etc.files used bythe lens design are compressed into this single file so thatyoucan easily make backupsof the design as it progresses through the design process,or transfer the design to another machine.The Project Directory group provides standard Windows file management functionality tailored to the lens project files.For a complete description of the lens project feature,see Convert to Lens Project.The Export group provides access to all the export capabilities in OpticStudio,including exporting to ZMX,STEP,IGES,SAT and STL format CAD files,and exporting to DXF and IGES linework diagrams.The Zemax Black Box feature allows you to encrypt a range of surfaces in the lens data spreadsheet,which can be givento other OpticStudio users without revealing the details of the design itself.This lets you give fully ray-traceable files tocustomers,or to other colleagues on a need-to-know basis,that give exact results on raytrace but do not reveal the designprescription.The Encrypted Coatings feature is a similar capability for thin-film coatings,and allows the full prescription of a thin-filmcoating to be exported in an encrypted format that allows exact ray tracing without making the design itself available.The Export to Speos Lens System tool lets you create a reduced-order model of the cumrent optical system to be used ina Speos simulation.The generated model includes the relevant parameters of the optical system to enable accurate opticalsensor simulation in a realistic environment.The Export to PanDao tool creates a .JSON file for use by the PanDao toolset(https://pandao.ch/),to help assess theimpact of lens fabrication methods on cost and performance.The Convert group lets you convert between OpticStudio Sequential and Non-Sequential Modes,and also convertsvarious file formats(like.MAT Matlab,.INTinterferometer data and .f3dOptiWave data)betweenoriginal and OpticStudiofomats.You can also save all you project files to a project directory and package your system into an OpticsBuilder ZBDfile.Release 2024 RI-Ansys,Inc.Allrights reservedThe File TabThe Explode group is used to explode CAD assemblies in various formats into individual parts using the ZOF(ZemaxObject Format)structure.1.1.Lens File GroupThese Lens File Group Tools are available in Sequential Ul Mode.NewOpenSaveFileLensLens FileThese Lens Files Group Tools are available in Non-Sequential Ul Mode.New Open Save SaveAsComparatorLens FileThese provide the standard Windows file management functionality.The Open icon gives access to the File Opendialog as well as the most recently used files list.All OpticStudio lens data is stored in (filename].zmx or (filename}.zos,and OpticStudio also creates [filename).zdaand {filename).cfg to allow any open Analysis windows to open in the same state as they were in when the file wassaved.The Insert Lens Icon Inserts surface data from a previously stored lens data to the current lens file.1.1.1.New/Open/Save/Save AsThe Lens File group provides standard Windows file management functionality.NewOpenSaveSaveAsNew:Clear the existing design file and start a new one.Open:Open any ZMX,ZOS,ZAR,ZPRJ,or ZBD file.This includes ZMX or ZOS which are set as lens projects.The Opendrop-down menu displays recently opened files.Save:Save the design file with the current name,overwriting the older version.Save As:Save a copy ofthe design with a new name,keeping the original file unchanged.You can save a ZMX,ZOS,ZAR,or ZPRJ file.All OpticStudio lens data is stored in a ZMX or ZOS file including lens project settings if the file isset as a lens project.Note that ZAR files include catalogand user-defined data,and ZPRJ is specially designed tocontain a lens project with all the linked project files.This Lens File Group Tool is found only in Sequential Ul Mode.Release 2024 RI-Ansys,Inc.Allrights reserved3