INTERNATIONALISOSTANDARD10110-1Second edition2006-07-01Optics and photonics-Preparationof drawings for optical elements andsystems-Part 1:GeneralOptique et photonique-Indications sur les dessins pour elements etsystemes optiques-Partie 1:GeneralitesReference number1S0101101:2006(E)1S010110-1:2006(E)PDF disclaimerThis PDF file may contain embedded typefaces.In accordance with Adobe's licensing policy,this file may be printed or viewed butshall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing.Indownloading this file,parties accept therein the responsibility of not infringing Adobe's licensing policy.The ISO Central SecretariatAdobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file;the PDF-creationparameters were optimized for printing.Every care has been taken to ensure that the file is suitable for use by ISO member bodies.Inthe unlikely event that a problem relating to it is found,please inform the Central Secretariat at the address given below.All rights reserved.Unless otherwise specified,no part of this publication may be reproduced or utilized in any fomm or by any meanselectronic or mechanical,including photocopying and microfilm,without pemmission in writing from either ISO at the address below orISO's member body in the country of the requester.ISO copyright officeCase postale 56.CH-1211 Geneva 20Tel.+41227490111Fax+41227490947E-mail copyright@iso.orgWeb www.iso.orgPublished in SwitzerlandISO 2006-All rights reserved1S010110-1:2006(E)ContentsPageForeword.....Scope...12Normative references.3Fundamental stipulations....24Presentation and dimensioning.24.124.2AxeS...4.3Leader lines.............54.4Test regions..4.5Test volumes....64.64.7Material specification ......144.8Indication of tolerances and various properties...14Additional indications for optical layout drawings165.1General.........5.2Axial separations....5.3Images,pupils,field stops and other apertures...19Annex A(informative)Examples of drawings of optical elements21Bibliography....ISO 2006-All rights reserved