ASAPTMoptical modeling softwareGETTING STARTED GUIDEBREAULT RESEARCH ORGANIZATION,INC.This manual is for use with ASAPTM.Comments on this manual are welcome at:support@breault.comFor technical support,information on additional copies of this documentation,or technical information about other BROproducts,contact:Breault Research Organization,Inc.6400 East Grant Road,Suite 350Tucson,AZ 85715US/Canada:1-800-882-5085Outside US/Canada:+1-520-721-0500Fax:+1-520-721-9630E-Mail:Technical Support:support@breault.comGeneral Information:info@breault.comWeb Site:http://www.breault.comBreault Research Organization,Inc.,(BRO)provides this document as is without warranty ofany kind,either express orimplied,including,but not limited to,the implied warranty of merchantability or fitness for a particular purpose.Somestates do not allow a disclaimer of express or implied warranties in certain transactions;therefore,this statement may notapply to you.Information in this document is subject to change without notice.Copyright 2000-2002,Breault Research Corporation,Inc.All rights reserved.This product and related documentation are protected by copyright and are distributed under licenses restricting their use,copying,distribution,and decompilation.No part of this product or related documentation may be reproduced in any formby any means without prior written authorization of Breault Research Organization,Inc.,and its licensors,if any.Diversioncontrary to United States law in prohibited.BRO acknowledges and recognizes the registered trademarks of product names in this manual:Acrobat is a registered trademark of Adobe Systems,Inc.AutoCAD is a trademark of the AutoDesk Corporation.ASAP,APART,and ReflectorCAD are trademarks of Breault Research Organization,Inc.ZEMAX is a trademark of Focus Software,Inc.Windows 98/ME/2000 and Windows NT,and XP are registered trademarks of Microsoft Corporation.CODE V is a registered trademark of Optical Research Associates.Rhinoceros is a registered trademark of Robert McNeel Associates.Pro/ENGINEER is a registered trademark of Parametric Technology Corporation.ProSource and Radiant Sources are a registered trademarks of Radiant Imaging,Inc.SentinelPro is a trademark of Rainbow Technologies,Inc.Open GL is a trademark of Silicon Graphics.OSLO is a registered product of Sinclair Optics,Inc.BR0-01082002/215)/start*,fmGetting Started in ASAP 3